The LogMessage 1000 is equipped with 15 analog inputs and a sampling rate of up to 600 measurements per second. The inputs can be used for data acquisition of mV, mA signals or any type of thermocouple. All inputs have differential and galvanic isolation.

• 600 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): 15
• Analog inputs(mV, mA, thermocouple, RTD): none
• Analog outputs(mA): none
• Digital inputs(counter): none
• Digital outputs: none

The LogMessage 2000 is equipped with 10 universal analog inputs, one analog output, 12 digital inputs (11 counters) and 17 digital outputs. The device has a range of internal monitoring and control functions that enable it to be used as a data acquisition device as well as an independently operating system for control, automation or monitoring.

• 600 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): none
• Analog inputs(mV, mA, thermocouple, RTD): 10
• Analog outputs(mA): 1
• Digital inputs(counter): 12(11)
• Digital outputs: 17

The LogMessage 3000 is equipped with 15 analog inputs (600 Hz sampling rate) and 24 synchronous digital inputs (with a time resolution of 1 msec). The device is highly suited to fault analysis as well as to processing digital and analog events.

• 600 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): 15
• Analog inputs(mV, mA, thermocouple, RTD): none
• Analog outputs(mA): none
• Digital inputs(counter): 24
• Digital outputs: 1

The LogMessage 4000 has an overall sampling rate of up to 10,000 measurements per second and is ideally suited to monitoring functions. Any number of alarm and logic channels can be defined for the 8 analog inputs and 28 digital channels. Any of the 5 digital outputs can be switched irrespective of the current alarm situation.

• 10000 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): 8
• Analog inputs(mV, mA, thermocouple, RTD): none
• Analog outputs(mA): 2
• Digital inputs(counter):28 (2)
• Digital outputs: 5

The LogMessage 5000 is equipped with 16 universal analog inputs. The inputs are designed to cope with high voltages between individual channels. The LogMessage 5000 has no problem measuring non-isolated signals.

• 80 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): none
• Analog inputs(mV, mA, thermocouple, RTD): 16
• Analog outputs(mA): none
• Digital inputs(counter): none
• Digital outputs: none

The LogMessage 6000 is equipped with more than 25 analog inputs. The device has an overall sampling rate of up to 1200 measurements per second and can directly acquire, monitor and record data from any thermocouple or RTD sensor.

• 1200 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): 15
• Analog inputs(mV, mA, thermocouple, RTD): 10
• Analog outputs(mA): 1
• Digital inputs(counter): none
• Digital outputs: 1

The LogMessage 7000 can acquire measurements from up to 30 thermocouples of any type. Configuration software is available to set channels to specific thermocouple types.

• 1200 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): 30
• Analog inputs(mV, mA, thermocouple, RTD): none
• Analog outputs(mA): none
• Digital inputs(counter): none
• Digital outputs: none

The LogMessage 8000 is equipped with 15 analog inputs and 12 synchronous digital inputs. The device also has 16 digital outputs to control alarms and events.

• 600 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): 15
• Analog inputs(mV, mA, thermocouple, RTD): none
• Analog outputs(mA): none
• Digital inputs(counter): 12 (11)
• Digital outputs: 16

The LogMessage 9000 is equipped with 20 analog inputs, 2 analog outputs and 2 digital outputs. The device has an overall sampling rate of up to 1200 measurements per second and can directly acquire, monitor and record data from any thermocouple or RTD sensor.

• 1200 Hz sampling rate
• Analog inputs(mV, mA, thermocouple): none
• Analog inputs(mV, mA, thermocouple, RTD): 20
• Analog outputs(mA): 2
• Digital inputs(counter): none
• Digital outputs: 2

• 16 synchronous analog inputs, 50 kHz sampling rate per channel, IEPE, mV, mA sensors selectable via software
• Integrated comparators for Keyphasor® sensors
• 32 GB data logger memory
• 4 digital inputs for frequency measurement
• 4 analog outputs for monitoring
• 8 digital outputs
• Display for reading data on-site
• Pluggable screw terminals, DIN rail-mounting