• Cooling Tower
• Evaporative Condensers
• Chemical plants
• Pulp and paper mills
• Pumps
• Fans
• Packaging equipment Packaging equipment

• Three-phase, IV, VI, IV/VIII and VI/XII pole, 60Hz, 60/50Hz (Single Speed Only)
• Voltage: 208-230/460V, 200V, 460V or 575V
• Totally Enclosed Fan Cooled – TEFC (IP55) water tight and dust tight enclosure
• Space Heaters
• Multiple Endbell Drains for shaft up, down or horizontal mounting
• Automatic drain plugs on T-Box
• Rubber Lead Separator (isolator) between T-Box and Frame
• Joint Seal
• Internally and Externally Epoxy painted
• V-ring slingers on both endshields
• External Slinger (Umbrella Seal)
• Double Sealed - 2RS Ball Bearings (up to 326T)
• NEMA dimensions
• Double Impregnation and Bake
• Class ‘F’ insulation for all frames
• Class ‘H’ resin insulation system
• Temperature rise: Class ‘B’ (80ºC)
• NEMA Design ‘B’*
• Most ratings meet Design C Torque
• Service factor:
  • 1.25 up to 100HP
  • 1.15 from 125HP & up
• Continuous duty (S1)
• NPT threaded terminal box
• F2 mount
• Stainless steel nameplate AISI 316 with laser etching
• MGI Part 31 rating for use with VFD - 1000:1 Variable Torque speed range.

• Special voltages
• Specially designed shaft
• Thermistor, Thermostats or RTD’s (PT100)
• Additional terminal box
• Drip cover (canopy) for shaft down applications
• Cable glands
• 'C' and 'D' flanges for all ratings
• Labyrinth taconite seal available on all ratings

Design B torque rating on nameplate can be re-plated for Design C. All motors are tested according to IEEE 112 Std. - Method ‘B’ or C390 CSA. Energy efficiency motors verified by UL in addition to the DOE.