• Pumping applications
• Pulp and paper mills
• Petrochemical
• Other

• Three-phase, II, IV or VI pole, 60Hz
• Voltage: 460V (3 wire)
• Totally enclosed fan cooled ( TEFC)
• Degree of protection: IPW55
• Class "F" insulation ("B" Temperature rise)
• 40ºC ambient
• Service Factor:
  - 1.25 - up to 100 HP
  - 1.15 - from 125HP and up
• Squirrel cage rotor / Aluminum die cast
• 143T up to 586/7 cast iron frame
• All cast iron reinforced construction: frame, endshields, terminal box and fan cover
• Stainless steel nameplate
• All 3600RPM and 1800RPM motors are supplied with ball bearings as standard. Roller bearings are supplied as standard on frames above 404T, 1200RPM and 900RPM
• Brass labyrinth seal on drive end and opposite drive end
• Corrosion resistant epoxy finish
• Color: RAL 6002 (Green)
• Regreasable ball bearings D.E. and O.D.E.
• Oversized rotatable cast iron conduit box
• High tensile steel shaft (for frame 404T and up)
• Color: RAL 6002 (Green)

Special Features that come standard included:
• Labyrinth tachonite seal, IP55 and IP65: This brass seal has no contact surfaces to wear out.
• Bearing life 50,000 hours
• Paint: Epoxy polyamide enamel
• Fan: Bronze

• Special voltages
• Specially designed shaft
• Space heaters
• Second shaft end
• Thermostats or RTD's (PT100)
• Additional terminal box
• Drip cover (canopy) for shaft down applications
• Cable glands
• Flange mount

All motors supplied with IEEE841 Test Report

All WEG motors are energy efficiency verified by UL in addition to the DOE.

Motors are nameplated Class I Div. II Groups B, C and D .