• Pumps
• Fans
• Kneader and mixer machines
• Cutter and sawing machines
• Pressing machines
• Industrial equipment
• Conveyors
• Blowers
• Compressors
• Machinery
• Cranes
• Packaging equipment

• Three-phase, II and IV pole, 60Hz
• Voltage: 208-230/460V, 200V, 460V or 575V
• Open drip proof (ODP)
• NEMA dimensions
• NEMA Design "B"
• Service factor: 1.15
• Class "F" insulation for all frames - all insulation materials are class "H" (180ºC) except motor leads (class "F")
• Continuous Duty (S1), 40ºC ambient
• 1045 heat treated and stress relieved carbon steel shaft (4140 for roller bearing motors)
• All 3600RPM and 1800RPM motors are supplied with ball bearings as standard. Roller bearings are supplied as standard on frames above 404T, 1200RPM
• F1 mount (also available flanged motors
• Paint: Synthetic enamel alkyd resin base
• Color: RAL 6002 - Green
• NPT threaded terminal box
• Stainless steel nameplate - laser etched (except roller steel frame - sticker)

• Cable glands
• Special voltages
• Cast iron NEMA "C" flange available for all frames or "D" flange ("D" flange only for frames 254T and up)
• Specially designed shaft
• Second shaft end
• Thermistors, thermostats or RTD"s (PT100) for frame 182T and up
• Roller bearings on drive end
• IEC metric frames (on request) - for frame 254T up to 445T

FOR FRAME 143/5T up to 213/5T only
• Welded steel plate frames (welded feet)
• Cast iron endshields with through bolt construction
• "ZZ" bearings (double shielded)
• Degree of protection: IP21
  
  FOR 182/4T and 213/5T FRAMES only
• Aluminum endshields and terminal box
• Cooling system with finned rotor
  
  FOR FRAME 254/6T UP TO 444/5T
• Cast iron frames
• Cast iron endshields and terminal box
• Cooling system with finned rotor
• All 3600RPM and 1800RPM motors are supplied with ball bearings as standard. Roller bearings are supplied as standard on frames 404T up to 445T, 1200RPM
• Winding temperature detector (1 per phase) - thermistors from frame 324T up to 445T
• Regreasable bearings positive pressure lubrication system (frame 254T and up)
• Degree of protection: IP23

All motors are tested according to IEEE 112 std. - method "B" or C390 CSA

All motors are tested according to IEEE 112 std. - method "B" or C390 CSA

All WEG motors are energy efficiency verified by UL in addition to the DOE.