Home > PCO Products > Power Supply Products > *NEW* PCO Power Supply Products >

PCO Power Supply, P/N - KET-2021A-PCO
PCO Power Supply, P/N - KET-2021A-PCO


 
Alternative Views:



Description
 

We are now unveiling our new power supply that incorporates features meant to make your job easier. With a status display, bus monitoring, and test points right on the faceplate we made this design with the end user in mind. We are bringing to you a supply that was built to provide many years of continuous service for your application. We can provide more info if you call us at 281-421-1321 or email Sales@pco2.com.



Input Voltage:

AC (50 hertz to 500 hertz) or DC, With Automatic Voltage Selection

100 Volt AC or DC Min

200 Volt AC or DC Max

120 - 150 Volt AC or DC Nominal

78% - 88% Efficiency

.2% Voltage Difference Between No Load and Full Load

Hold-up Capacitor:

2200uF @ 250 Volts (100uF @ 250 Volts OEM)

Temperature Range:

-10 degrees C to +100 degrees C (per brick at full load)

 

Output:

All Fused

+15/-15 Volts Fused At 5 Amps,

5 Volts Fused At 9 Amps

But Actual Capabilities 5V @ 20A, 15V @ 10A and -15V @ 10A

Outputs Wired For Redundant Operation

Voltage Adjustment Located On Front Panel

Voltage Test Points On Front Panel (Before O-ring Diode)

 

Alarming:

Alarm When Input Voltage Out Of Range or Failure

Alarm When Output Voltage Out Of Range or Failure

Audible Alarm (Horn) And Flashing Red LED On Input Or Output Failure

Green LED For Input And Output Normal Operation

Test Switch To Test Alarm Circuitry (Horn And Flashing Red LED)

 

Output Display:

Output Display Size - 75.0(W)mm    X  52.7(H)mm  X  MAX9.5(D)mm (LED B/L) LCD Back Light

Displays Voltage / Current / Status



Browse for more products in the same category as this item:

PCO Products > Power Supply Products > *NEW* PCO Power Supply Products
PCO Products
PCO Products > Power Supply Products