Positioning Module | 1746-Qx

Attribute	1746-QV
Number of inputs	1
Number of outputs	1
Backplane current (mA) @ 5V	250 mA
Voltage category	Temposonics II (DPM & RPM) or Balluff (BTL-2-L2 & M2) -10V DC…10V DC
Independent power source requirement	0.400 mA @ +15V DC and 0.295 A @ -15V DC (typical but not LDT-dependent)
LDT Inputs	Interrogate Gate 15V Dc PS PS Common Shield/Frame
Module resolution and range	160 in ±0.01 in.
Analog output	0…10V DC @ 250 mA or -10…+10V DC @ 250 mA
Accuracy of voltage output	within ±1% of its programmed value
Module update time	2 ms

Attribute	1746-QS
Number of inputs	4
Number of outputs	4
Backplane current (mA) @ 5V	1000 mA
Backplane current (mA) @ 5V	200 mA
Voltage category	Input: LDT with RPM or DPM Output: -10V DC…10V DC
Analog output	-10…10V DC @ 5 mA
Output resolution	12-bit
Module update time	2 ms
Fail-safe timers	Drive Output Disable: 15 μs Software Reset: 30 ms
LDT range and resolution	2.30 in. @ 0.004 in. 120 in. @ 0.002 in. 60 in. @ 0.001 in.
Module cable connections	I/O to IFM: -DB-26 subminiature (1492-ACABLE) Configuration/Diagnostics: -DB-9 (1746-CP3)
LDT Cable Length	RPM type: 45.7 m (150 ft) DPM type: 61.0 (200 ft)