You are here: Home > Instrumentation > ABB Kent-Taylor Products > Flow Measurement Products
Sort By:
Page of 2
CORIOLIS MASS FLOWMETERS, P/N: FCB330

  • Coriolis mass flow advantage - multivariable measurement of mass flow, density and temperature in one device Compact size with no up or downstream piping requirements - get the benefits of coriolis mass flow in tight spaces Low pressure drop - save 25% on pump energy costs compared to other brands Wide measurement span in a single meter - other brands require two meter sizes to meet all applications that costs more in spares and installation
  • Easy to use - features ABB's unique common HMI for easy set-up and commissioning

Any questions? Please call us at 281-421-1321

CORIOLIS MASS FLOWMETERS, P/N: FCB350

  • Coriolis mass flow advantage - multivariable measurement of mass flow, density and temperature in one device Compact size with no up or downstream piping requirements - get the benefits of coriolis mass flow in tight spaces Low pressure drop - save 25% on pump energy costs compared to other brands
  • Wide measurement span in a single meter - other brands require two meter sizes to meet all applications that costs more in spares and installation
  • Easy to use - features ABB's unique common HMI for easy set-up and commissioning

FCB350 adds:
  •   Higher accuracy, temperature and density capability - for when you need maximum performance

Any questions? Please call us at 281-421-1321

CORIOLISMASTER, P/N: FCM2000-MC2

  • Four accuracy classes in one device reducing product variability and warehousing costs
  • Electronic module exchange without recalibration or reconfiguration
  • Excellent density measurement with integrated concentration computation
  • Insensitive to external vibrations and gas content in the fluid due to DSP electronics
  • Direct mass flow measurement enables exact dosing of raw materials to increase efficiency and save resources

Any questions? Please call us at 281-421-1321.

CORIOLIS MASS FLOWMETER, P/N FCM2000-MS2

  • Most other flowmeters are not suitable for low flow rates, but ABB's CoriolisMaster FCM2000-MS2 meter is specifically designed for this tough application: Single bent-tube design senses smallest flow rates with accuracy
  • Tough construction delivers reliable measurement in harsh conditions
  • Available in small sizes down to 1.5mm (1/16") for precision applications
  • High pressure capability up to 400 bar (5800 psi)
  • Features ABB's worldclass transmitter technology

Any questions? Please call us at 281-421-1321

SENSYCAL-T, P/N: FCU2000-T

  • The FCU200-T (SensyCal T) is a two-channel energy, mass flow and volume counter.
  • The device is designed to convert either direct current to a proportional pulse frequency or a proportional pulse frequency to a direct current.
  • The following process signals can be connected on device 2 active current signals or 2 active pulse/frequency signals 2pulse output
  • Graphic display with background light.
  • The key day function, data logger and the MBUS, MODBUS and Profibus (over converter) communications are for further processing.

Any questions? Please call us at 281-421-1321

SENSYCAL-W, P/N: FCU2000-W

The FCU200-W (SensyCal W) is designed for determining heat balances.It is used for recording heat, cold or flow rates of liquids (water, brine, Oil, etc.) in the field of remote heating systems or for calibrated accounting for hot water systems. The calculator can be used with all marketable flow meters, ultrasound meters, swirl meters, MID, vortex flow meter, orifices, etc.
It is not only the optimal solution for power plants and chemical plants, but also for heating and air conditioning and for the pharmaceutical industry.

Any questions? Please call us at 281-421-1321

SENSYCAL-R, P/N: FCU4000-IR

The FCU400-IR (SensyCal IR) Is a complete system for contactless temperature monitoring of contact points and power switches in MV switchgear.The contact resistance at the contact points between the conductor rails and power switches may increase due to loose screws or corrosion. As s result, power will be converted to heat (power dissipation), and the system may be damaged.
Temperature monitoring with SensyCal IR is the solution. Continuous temperature monitoring of live parts, Monitoring of up to 12 hot spots in a switchgear with only one system, Alarm output, analog output, MBUS, MODBUS, locally display, No PVC cables used, All parts completely shielded against EMI/RFI, are a few product feature
Any questions? Please call us at 281-421-1321

SENSYCAL-P, P/N: FCU4000-P

The FCU400-P (SensyCal P) is a Signal combination, e.g. high precision T measurement, summation, etc.High-precision differential temperature measurement is the basis for heat balances used for further process optimization. The system consists of a SensyCal computer and two high-quality, high-precision paired PT100 sensors.If required the system can be calibrated and certified in our in-house DKD calibration lab.

Any questions? Please call us at 281-421-1321

SENSYCAL-S, P/N: FCU4000-S

The FCU400 S (SensyCal S) is a steam computer that can be used to determine thermal output of boiler systems and branch lines by calculating mass flow and thermal balance and for fiscal metering purposes. It is designed for superheated or saturated steam with or without condensate return, as flow computer and/or caloric energy computer.

The calculator is used together with all marketable flow meters, e.g. Vortex & swirl meters, ultrasound meters, orifices, etc. transmitting a pulse, frequency or current signal.The density and enthalpy of steam and water are calculated in accordance with the latest industrial standard IAPWS-IF 97Graphic display with background light.The key day function, data logger and the MBUS, MODBUS and Profibus (over converter) communications are for further processing.

 Any questions? Please call us at 281-421-1321

CALMASTER2, P/N: CALMAS2

CalMaster2 is a suite of stand-alone field verification tools for use with ABB's range of electronic flow meters, that enables users to test the integrity of flow meter systems. The verification comprises a large number of separate test routines. A report is displayed of each test as it verifies the condition and performance of the flow meter under test.

Any questions? Please call us at 281-421-1321

AUTOCHART, P/N: FZC300

ABB AutoChart is a web-based presentation system tha tenables data from equipment such as flow and pressure sensors to be viewed and analyzed quickly and easily. The system integrates with the latest ABB Explorer Transmitter fitted with a GSM mobile telephone. The transmitter sends information via SMS text messages to the ABB AutoChart portal where the user can view data over the Internet.

Any questions? Please call us at 281-421-1321

VERIMASTER, P/N: FZC200

  • VeriMaster also supports printing of calibration verification records for regulatory compliance.
  • VeriMaster integrates with WaterMaster seamlessly, meaning: no interruption to any of the wiring no cover removal, with operation through the front glass using the infrared service port no interruption to the measurement
  • An operator can also check and record the accuracy of the current and pulse outputs, if required.
  • VeriMaster is compatible with Microsoft Windows XP and Vista operating systems.

Any questions? Please call us at 281-421-1321

SCANMASTER, P/N: FCZ500

  • ScanMaster In Situ check of the sensor - integrity
  • In Situ - check of the transmitter integity
  • Quick and easy to use utility
  • Uses the advanced self-check and diagnostic capability of ProcessMaster or HygienicMaste
  • Uses the fingerprinting technology and compares the current status of sensor and transmitter to against a reference data record
  • Shows gradual changes e.g. these are recorded in the ProcessMaster 500 as a trend, graphical. ScanMaster is
  • compatible with Microsoft Windows XP and Vista operating systems.

Any questions? Please call us at 281-421-1321

SENSYFLOW FMT200-ECO2

Sensyflow FMT200-ECO2 is a very compact and extremely dynamic mass flow meter for air. It offers a direct mass or standard volume flow measurement in pneumatic applications, e.g. in paint robot control. A multi-variable connection system makes the Sensyflow FMT200-ECO2 easy to install in many different tubes or pipes. Analog and digital output signals allow for flexible signal processing.

Any questions? Please call us at 281-421-1321

SENSYFLOW, P/N: FMT200-D

Sensyflow FMT200-D is our compact specialist for mass balancing of compressed air systems. With a turndown ratio of 1:100, it allows metering and leakage detection together in one instrument.

  • 0(4)..20 mA directly from the sensor head
  •  low pressure drop < 10 mbar
  •  1:100 turndown ratio
  • pipe components with 1” to 3” threads
  • user-friendly handling

Any questions? Please call us at 281-421-1321

SENSYFLOW, P/N: FMT400-VTS

Sensyflow FMT400-VTS/-VTCS is a compact mass flow meter for gases and gas mixtures. It is available as Sensyflow FMT400-VTS/-VTCS for use in process applications, and as Sensyflow FMT400-VTS/-VTCS with an hygienic design. The 24 V powered instrument supplies 0(4)..20mA directly from the sensor head. Sensyflow pipe accessories ensure the sensor is located in the optimum position within the process.

 Any questions? Please call us at 281-421-1321

SENSYFLOW, P/N: FMT500-IG

Sensyflow FMT500-IG is a digital mass flow meter for air, gases and gas mixtures in process applications. The system is supplied with LCD display, integrated gas temperature measurement and totalizer functions. Communication and configuration is via the PROFIBUS DPV1 protocol or analog output / HART . Compact and remote versions allow for flexible mounting solutions. ATEX certified versions for Zone 0 and 1 applications are available.

Any questions? Please call us at 281-421-1321

SENSYFLOW, P/N: FMT700-P

Sensyflow FMT700-P is the high end product offering of the Sensyflow series. It supplies best accuracy together with an unrivalled response time of only 12 ms.Sensyflow FMT700-P supplies analog and digital output signals and allows direct connection to ASAM-GDI conformance measuring systems.

Any questions? Please call us at 281-421-1321

TRIO-WIRL V, P/N: FV4000

Size range flange:

  •  DN 15 (1/2”) to DN 300 (12”), wafer: DN 15 (1/2”) to DN 150 (6”)
  • DSP converter with most modern digital filter technology for the safe detection of also weakest sensor signals
  • Very robust and simple primary
  • Optionally integrated PT100 e.g. for very economic massflow-measurement of saturated steam or for temperature monitoring/alarms
  • DIN-wafer instruments in dazzle-compatible installation length (65 mm) for easy replacement of standard orifices

Any questions? Please call us at 281-421-1321

TRIO-WIRL S, P/N: FS4000

The TRIO-WIRL Swirlmeter provides all the advantages of the TRIO-WIRL V by needing shortest upstream/downstream distances, typical 3 x DN/1 x DN. As the Vortex flowmeter the Swirlmeter is based on the principle of Frequency measurement.

 The system has a freely configurable, two-line LC display for the actual flowrate and totalisation. Settings can be changed directly via 3 push buttons or via magnet sensors with closed housing. Additional to the 4-20mA analog signal a freely configurable switching output is already available. This can be used universally as pulse output, high-low alarms or for system supervision. TRIO-WIRL Swirlmeter are available as compact or remote design with 10m cable length.

Any questions? Please call us at 281-421-1321

ELECTROMAGNETIC FLOWMETER HYGIENICMASTER 300, P/N: FEH300

The Electromagnetic Flowmeter HygienicMaster 300 is designed specifically for the food & beverage, pharmaceutical and biotechnology industries. Manufactured from FDA approved materials and certified in accordance with EHEDG and 3-A, HygienicMaster sets a new benchmark.
The stainless steel exterior, the variable process connection, the advanced signal processing and the state-of-the-art data storage provide a complete and cost effective flow solution.
With HygienicMaster 300 you get a versatile, reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation.
 Any questions? Please call us at 281-421-1321

ELECTROMAGNETIC FLOWMETER HYGIENICMASTER 500, P/N: FEH500

The Electromagnetic Flowmeter HygienicMaster 500 is designed specifically for the food & beverage, pharmaceutical and biotechnology industries. Manufactured from FDA approved materials and certified in accordance with EHEDG and 3-A, HygienicMaster sets a new benchmark.
The stainless steel exterior, the variable process connection, the advanced signal processing and the state-of-the-art data storage provide a complete and cost effective flow solution.
With HygienicMaster 500 you get a versatile, reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with extended functionality and options. A meter with a short delivery and a simple and clearly understandable documentation.

Any questions? Please call us at 281-421-1321

AC MASTER ELECTROMAGNETIC FLOWMASTER, P/N: FSM4000

The flowrate of liquids, slurries, pastes and sludges can be measured accurately with the AC Master Electromagnetic Flowmeter FSM4000. Minimum conductivity 20 µS/cm (option 0.5 µS/cm). The measurement system consists of a flowmeter sensor and a transmitter in a remote mounted design.It is specially designed to measure liquids in the pulp & paper and the food & beverage industry.

 Any questions? Please call us at 281-421-1321

ELECTROMAGNETIC FLOWMETER, P/N: FES7000

The flowrate of liquids, slurries, pastes and sludges can be measured accurately with the Electromagnetic Flowmeter FES7000. Minimum conductivity 20 µS/cm (option 0.5 µS/cm). The intelligent filling and dosing system consists of a flowmeter sensor and a transmitter in a remote mounted design. Especially suited for batch, filling and injection processes, from minute quantities to large container filling.

Any questions? Please call us at 281-421-1321

ELECTROMAGNETIC FLOWMETER PROCESSMASTER 300, P/N: FEP300

The modular design of the ProcessMaster 300 offers the industry’s widest range of liners, electrodes and sizes to meet the needs of even the most demanding process applications in sectors as diverse as chemical, power, oil & gas, pulp & paper and metals & mining.
The powerful transmitter is easy to use and provides the output signal that meets your needs. With ProcessMaster 300 you get a versatile, reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation.
Any questions? Please call us at 281-421-1321

ELECTROMAGNETIC FLOWMETER PROCESSMASTER 500, P/N: FEP500

  • Highest measurement accuracy
  • Intuitive navigation and configuration
  • Backlit, high-contrast and configurable display Most modern diagnostics monitor the meter’s operability and your process providing the right information to keep the process up and running providing the right information to keep the process up and running.
  • Detection of Empty Pipe, Partially filling, gasbubbles, electrode coating
  • Monitoring of conductivity, sensortemperature, good grounding

Any questions> Please call us at 281-421-1321

ELECTROMAGNETIC FLOWMETER WATERMASTER V, P/N: FEV

  • Superior control through advanced sensor design
  • Submersible and buriable installation options
  • Improved performance through digital signal processing (DSP)
  • Intuitive navigation and configuration
  • Speed, ease and security in the field
  • Detailed diagnostics for rapid decision making
  • Powerful and flexible transmitter Size range DN 40 ... DN 300 (1-1/2 ... 12 in.)

Any questions? Please call us at 281-421-1321

ELECTROMAGNETIC FLOWMETER WATERMASTER F, P/N: FEF

  • Submersible and buriable installation options
  • Improved performance through digital signal processing (DSP)
  • Intuitive navigation and configuration
  • Speed, ease and security in the field
  • Detailed diagnostics for rapid decision making
  • Powerful and flexible transmitter
  • Size range DN 350 ... DN 2200 (14 ... 88 in.)

Any questions? Please call us at 281-421-1321.

AQUAMASTER 3, P/N: FET200

  • OIML R49 and MID approved
  • Renewable (Solar / Wind) energy option
  • Option of a 5 year battery life
  • Mains power with backup version available
  • Quad band GSM / SMS communication Fit and flow
  • Size range 15 mm to 600 mm (1 to 12 in.)
  • Flow profile conditioning sensor

Any question? Please call us at 281-421-1321

AQUAPROBE, P/N: FEA100

The assembly can be installed in existing pipelines without the need for major excavations or alterations to pipe work normally associated with the installation full bore meters.