You are here: Home > Instrumentation > ABB Kent-Taylor Products > Level Measurement Products
Sort By:
Page of 2
THERMAL DISPERSION LEVEL SWITCH, P/N: TS

FEATURES:

  • For Liquids or Small Granular Solids
  • One Switch for Gas or Liquid Flow, Liquid Level, Interface Level or Temperature
  • No Moving Parts
  • Designed to 3A Standards
  • 316L Stainless Steel All Welded Construction Standard
  • Explosion Proof
  • Temperature Range 50 to 350F / -46 to 177C Standard
  • Pressure to 500 psig / 34.5 bar Standard

MAGNETIC LEVEL GAUGE, P/N: MW05

FEATURES:

  • Highly Visible Level Indication
  • Single Probe Guided Wave Radar Transmitters (No need for coaxial probes)
  • Compact Close-Coupled Chambers
  • Separate Chambers Provide Unobstructed Float Travel
  • Extruded Outlets and Smaller Chamber Sizes
  • Precision Fabricated Floats Temperature Range -60 F to 800 F (-51 C to 427 C) Pressures to 3000 psi (207 bar) Additional Transmitters And Switches May Be Added for Redundant Measurement
  • Optional Vent, Drain
  • Isolation Valves Insulation for High and Low Temperature Applications

Any questions? Please call us at 281-421-1321

MAGNETOSTRICTIVE LEVEL TRANSMITTER, P/N: AT100

FEATURES:

  • SIL2 Certified IEC 61508*
  • High Accuracy: .01% of Full Scale
  • Superior Piezo Ceramic Sensor (Patent # 5,473,245)
  • Local Indication with LCD Display
  • Never Requires Re-Calibration: Set It & Forget It
  • Dual Compartment Housing with Separate Field Terminal Compartment
  • Loop Powered to 75 (22M) Probe Length
  • Total and/or Interface Level Measurement
  • Pressure to 3000psig (207 bar), Std. 1800 psig (124.1 bar)
  • Temperature Range: -320 to 800 F (-196 to 427C) with options
  • Field Replaceable / Upgradable Electronics Module
  • Built In RFI / EMI Filter
  • Digital Communications

Any questions? Please call us at 281-421-1321

MAGNETOSTRICTIVE LEVEL TRANSMITTER, P/N: AT200

FEATURES:

  • SIL2 Certified IEC 61508*
  • Designed to Mount Externally to K-TEK KM26 or
  • Other Magnetic Level Gauge
  • High Accuracy: .01% of Full Scale
  • Superior Piezo Ceramic Sensor (Patent # 5,473,245)
  • Local Indication with LCD Display
  • Simple Calibration
  • Never Requires Recalibration: Set It & Forget It
  •  Dual Compartment Housing with Separate Field
  • Terminal Compartment
  • Total and/or Interface Level Measurement
  • ProcessTemperature Range -320 F to 800 F (-196 to 427C) with options
  • Field Replaceable Module
  • Built In RFI / EMI Filter
  • Digital Communication

MAGNETOSTRICTIVE LEVEL TRANSMITTER, P/N: AT600

FEATURES:

  • Designed to Mount Externally to K-TEK KM26 or
  • Other Magnetic Level Gauge
  • High Resolution 4-20 mA Output
  • Simple Mounting and installation
  • No Process Piping or Valve Required
  • Very Compact Design
  • Suitable for High Temperature Applications
  • Calibrates Without Opening Enclosure
  • Stainless Steel Enclosure

Any questions? Please call us at 281-421-1321

MAGNETOSTRICTIVE LEVEL TRANSMITTER, P/N: AT100S

FEATURES:

  • SIL2 Certified IEC 61508*
  • High Accuracy: .01% of Full Scale
  • Superior Piezo Ceramic Sensor (Patent # 5,473,245)
  • Local Indication with LCD Display
  • Single & Double Tri-Clamp Installations
  • Suitable for CIP & SIP Applications
  • 180 Grit Polish Standard
  • Never Requires Re-Calibration: Set It & Forget It
  • Dual Compartment Housing with Separate Field Terminal Compartment
  • Pressure to 1750 psig (120.7 bar)
  • Temperature Range: -320 to 450 F (-196 to 232C) with options
  • Field Replaceable / Upgradable Electronics Module
  • Built In RFI / EMI Filter
  • Digital Communication

MAGNETOSTRICTIVE LEVEL TRANSMITTER, P/N: AT500

FEATURES:

  • Mounts from Top of Tank
  • High Resolution 4-20 mA Output
  • Simple Mounting and installation
  • Very Compact Design
  • Calibrates Without Opening Enclosure
  • Stainless Steel Enclosure
  • Custom Floats Available
  • Measurement of Total or Interface Level

Any questions? Please call us at 281-421-1321

LASER LEVEL TRANSMITTER, P/N: SS140XP

FEATURES:

  • Long Range to 240 ft. / 75m
  • No Beam Divergence = No False Echoes
  • Measures any Surface at any Angle
  • Explosion Proof Dual Compartment Enclosure
  • Built-in Laser Pointer
  • Built-in Integrated Purge Port
  • Easy Set-up: Push Buttons or HART Protocol
  • Local LCD Display Indication

Any questions? Please call us at 281-421-1321

LASER LEVEL TRANSMITTER, P/N: LM80

FEATURES:

  • Range up 100 ft. / 30 m (level applications) and up to
  • 500 ft. / 150 m (positioning applications)
  • No Beam Divergence = No False Echoes
  • Measures any Surface at Any Angle
  • Rugged and Robust Aluminum Enclosure
  • Built-in Purge Port (1/8 FNPT)
  • No Calibration Required
  • Easy and intuitive setup

Any questions? Please call us at 281-421-1321

VIBRATING FORK LEVEL SWITCH, P/N: RS85

FEATURES:

  • Direct Replacement for Ultrasonic Gap Switches, RF Capacitance Switches, Float Switches and Other Technologies
  • Immune to Coating or Build-Up on Sensor
  • Robust Sensing Element
  • and 1 (NPT, BSPT) Process Connections
  • Choice of International Flanges and Range of Tri-Clamp Fittings and Probe Finishes
    • Temperatures between -40oF to 350oF (-40oC to 177oC) with HT6 High Temp Ext.
    • Pressures to 2000 psig (138 bar)
    • Viscosity up to 20000 cP
    • Density from 0.45 to 2.0
  • Single or Dual Compartment Housing with Viewing Cover
  • Field Selectable Parameters with External Magnet or Internal Pushbuttons (Fail Safe, Density, Time Delay)
  • Modular Electronics with Alarm Status LED
  • Self-Test Diagnostics
  • Extended Probe Lengths to 120 in (3048 mm)

Any questions? Please call us at 281-421-1321

LS SERIES MECHANICAL LEVEL SWITH

Product Features:

  • Rugged and Robust Chamber Design for Demanding Applications
  • One Step Switch Point Adjust 
  • Precision Fabricated Floats and Displacers
  • Compact Switching Mechanism Eliminates Bulky Housing and Traditional Bias Springs
  • Easily Retrofitted to Most Competitor Models
  • Eight (8) Standard Designs and Six (6) Compact Switching Mechanisms

Any questions? Please call us at 281-421-1321

BUOYANCY LEVEL SWITCH, P/N: MS50

The MS50 is used for top of tank mounting. The MS50 has a 316SS float, 316SS rigid float and two switches for high and low detection. Typical applications where the MS50 is used are butane, propane, oil, chlorine, acids, water and interfaces.

FEATURES

  • Up to six SPDT switches per unit (NO & NC Contacts)
  • Interface & total level capability
  • Trip point adjustable without removing vessel from service
  • Vibration resistant (Multi-Float option only)
  • Suitable for high temperature applications
  • 316L stainless steel wetted parts standard
  • Field adjustable and replaceable switches
  • 316/316L standard, exotic alloys & thermoplastic available
  • Terminal block(s) included

Any questions? Please call us at 281-421-1321

BUOYANCY LEVEL SWITCH, P/N: MS8F

FEATURES:

  • Electrical Contacts are Magnetically Isolated from Process
  • Stainless Steel Float for Low Pressure / High Temperature Applications
  • Mounting Via 1 NPT Process Connection
  • Optional Flange Mounting Adapters Available
  • Hermetically Sealed SPDT Switch (NO / NC Contact)
  • Vibration Resistant
  • Switch is Totally Enclosed within Stainless Steel Housing (flying leads)
  • Hex Shaped Housing & SPDT Contacts Allow for Easy Installation
  • Designed & Constructed to FM, UL, NEMA & ANSI/ISA Guidelines
  • Two Standard QuikShip Models with Various Custom Designs Available

Any questions? Please call us at 281-421-1321

BUOYANCY LEVEL SWITCH, P/N: MS10

Product Features:

  • Electrical Contacts are Magnetically Isolated from Process
  • Mounting via 1-1/2" NPT Process Connection
  • Optional Flange Mounting Adapters Available
  • Hermetically Sealed SPDT Switch (NO / NC Contact)
  • Vibration Resistant
  • Switch is Totally Enclosed with Stainless Steel Housing
  • Hex Shaped Housing
  • Designed and Constructed to FM, UL, NEMA and ANSI/ISA Guidelines

Any questions? Please call us at 281-421-1321

CHUTEMASTER SPECIALTY LEVEL SWITCH, P/N: CHMSTR

FEATURES:

  • Blocked chute detection
  • Point level detector
  • Not Affected By Dust or Particle Build Up
  • 33 ft. (10 m) Range
  • 110/220Vac or 24Vdc Supply
  • Configurable Relay Output With On/Off Delay
  • Adjustable Gain Setting
  • Easy Set-up and Operating
  • Optional Flanged Mounting Bracket

Any questions? Please call us at 281-421-1321

SPECIALTY LEVEL INSTRUMENT, P/N: KP

FEATURES:

  • Drop In Replacement for Existing Rotary Paddle Switches
  • Lowest Cost Level Solution
  • Application Versatility
  • Variety of Paddles for Differing Densities
  • Mounting for Side or Top of Silo / Bin
  • Reduced Footprint
  • Two 20 Amp, SPDT Switches
  • 120 or 240 Operating Voltage
  • Non-Contact, Double Shielded Bearings
  • Screw On Cover for Easy Accessibility
  • Shaft Lip Seal Rated to 140 psi / 9.7 bar

Any questions? Please call us at 281-421-1321

SPECIALTY LEVEL SWITCH, P/N: KM50

FEATURES:
Process

  • Independent of bulk material properties
  • Very accurate measurement

Service
  • Simple installation and commissioning
  • Rope, tape and (optional) motor with increased service life
  • Low maintenance

Approvals
  • Approval for use in Hazardous Areas

Mechanics
  • Measurement range upto 40m (133ft)
  • 1 1/2 process connection possible
  • Internal tape cleaner for difficult materials
  • Window in lid and outside start button (optional)

Electronics
  • Micro processor controlled measurement
  • Comprehensive diagnostic possibilities
  • Output 0/4-20mA / Modbus / Profibus DP / counting pulses
  • Programmable Relays (can be used as level limit switch outputs)

MAGNETIC LEVEL GAUGE SWTICH, P/N: MS30

FEATURES:

  • Unique Concept of Magnetic Coupling, Eliminating Direct Contact with Process
  • No Process Piping or Valves Required
  • Easy Mounting and Adjustment; Only Small Screwdriver Required
  • Trip Point Infinitely Adjustable without Changing Process Piping
  • Hermetically Sealed SPDT Switch (NO or NC Contacts)
  • MS30 NOT Recommended for Vibration Environment / Application
  • Switch is Encapsulated within a Stainless Steel Housing
  • Designed and Constructed to FM, UL, NEMA, and ANSI/ISA Guidelines

MAGNETIC LEVEL GAUGE SWITCH, P/N: MS41

FEATURES:

  • Hermetically Sealed DPDT Switch
  • NEMA 4X Sealed 316L Stainless Steel Enclosure
  • Separate Terminal Compartment Eliminates Corrosion Potential
  • Easy Mounting and Adjustment - Only Screwdriver Required
  • Trip Point Infinitely Adjustable Without Changing Process Piping
  • Vibration Resistant
  • Compact Design
  • Process Temperatures from 320 to 850F / -195 to 454C.

Any questions? Please call us at 281-421-1321

MAGNETIC LEVEL GAUGE SWITCH, P/N: PS45

FEATURES:

  • Unique Concept of Magnetic Coupling, Eliminating Direct Contact with Process
  • No Process Piping or Valves Required
  • Easy Mounting and Adjustment; Only a Small Screwdriver Required
  • Action is Field Reversible
  • Positive Action - Output is Either Zero or Supply Pressure, No Intermediate Values
  • Vibration Resistant
  • Corrosion Resistant Construction
  • No Air or Gas Consumption Required
  • High Reliability - Minimal Required Maintenance

Any questions? Please call us at 281-421-1321

MAGNETIC LEVEL GAUGE, P/N: MS40

FEATURES:

  • Unique Concept of Magnetic Coupling, Eliminating Direct Contact with Process
  • No Process Piping or Valves Required
  • Easy Mounting and Adjustment; Only Small Screwdriver Required
  • Trip Point Infinitely Adjustable without Changing Process Piping
  • DPDT Switch (NO or NC Contacts)
  • Vibration Resistant
  • Compact Design
  • Suitable for High Temperature Applications
  • Designed and Constructed to FM, UL, NEMA, and ANSI/ISA Guidelines

Any questions? Please call us at 281-421-1321

MAGNETIC LEVEL GAUGE, P/N: MS35

FEATURES:

  • Unique Concept of Magnetic Coupling, Eliminating Direct Contact with Process
  • No Process Piping or Valves Required
  • Easy Mounting and Adjustment; Only a Small Screwdriver Required
  • Action is Field Reversible
  • Positive Action - Output is Either Zero or Supply Pressure, No Intermediate Values
  • Vibration Resistant
  • Integral High Volume, Rapid Response Relay
  • Low Air or Gas Consumption
  • Corrosion Resistant Construction

Any questions? Please call us at 281-421-1321

GUIDED WAVE RADAR LEVEL TRANSMITTER, P/N: MT5000

FEATURES:

  • Graphic Display with Waveform Screen
  • Widest Selection of Wetted Materials
  • Radar Signal Travels Along the Waveguide Eliminates False Echoes and Minimizes Signal Loss
  • No Moving Parts
  • Linearization Table
  • Lengths from 1 to 200 ft. / 0.3 to 61 meters
  • Rigid, Flexible Cable & Coaxial Probes
  • All Digital Electronics

Any questions? Please call us at 281-421-1321

GUIDED WAVE RADAR LEVEL TRANSMITTER, P/N: MT5200

FEATURES:

  • Graphic Display with Waveform Screens
  • All Digital Electronics
  • Radar Signal Travels Along the Waveguide
    • Eliminates False Echoes and Minimizes Signal Loss
  • No Moving Parts
  • 2 Wire Loop Powered
  • Linearization Table
  • Lengths From 1 to 100 ft. / 0.3 to 30.6 m
  • Flexible Cable Probes

Any questions? Please call us at 281-421-1322


GUIDED WAVE RADAR LEVEL TRANSMITTER, P/N: MT5100

FEATURES:

  • Total and Interface Level Measurement from a single process penetration (see options)
  • Graphic Display with Waveform Screen
  • All Digital Electronics
  • Weak Signal Alarm
  • Widest Selection of Wetted Materials
  • Radar Signal Travels Along the Waveguide Eliminates False Echoes and Minimizes Signal Loss
  • No Moving Parts
  • 2 Wire Loop Powered
  • Lengths From 1 to 65 ft. / 0.3 to 19.8 meters
  • Rigid, Flexible Cable, and Coaxial Probes

Any questions? Please call us at 281-421-1321

ULTRASONIC TRANSMITTER TRANSDUCER, P/N: K10

The K10 is a General Purpose Transducer that can be used with the KSONIK I and III Transmitters in both Liquid and Solid Applications. Maximum Measuring Length (ML) 50 ft. / 15 m.

Any questions? Please call us at 281-421-1321

ULTRASONIC TRANSMITTER TRANSDUCER, P/N: K10F

Maximum Measuring Length (ML) 50 ft. / 15 m

Any questions? Please call us at 281-421-1321

ULTRASONIC TRANSMITTER TRANSDUCER, P/N: K10T3

PTFE lined transducer, 3 inch flange

Any questions? Please call us at 281-421-1321

ULTRASONIC TRANSMITTER TRANSDUCER, P/N: K10T4

PTFE lined transducer, 4 inch flange

Any questions? Please call us at 281-421-1321

ULTRASONIC TRANSMITTER TRANSDUCER, P/N: K20

K20 Intermediate Range. Maximum Measuring Length (ML) 100 ft. / 30 m.

Any questions? Please call us at 281-421-1321