Home > Instrumentation > Iris Products >

SIGNAL PROCESSOR FOR FLAME MONITOR SYSTEM, P/N: Model 700
SIGNAL PROCESSOR FOR FLAME MONITOR SYSTEM, P/N: Model 700


 

Description
 

The IRIS Model 700DC and Model 700AC are single-channel flame scanners when combined with an IR (Infrared) or UV (Ultraviolet) viewing head from either the 7xx or 8xx series IRIS viewing heads.

The Model 700 flame scanner is fail-safe and designed for ease of setup and use, and for high reliability. The signal processor snaps onto a standard 35mm DIN rail. All connections are made through high quality Phoenix plug-in connectors.
The signal processor can be readily removed simply by unplugging three plugs and releasing it from the DIN rail.

The front panel of the model 700 provides a keypad that is used for system setup. A two-digit numeric display and four LED status indicators make the system easy to use. There are also two LED's in the connector at the viewing head which help with aligning the viewing head and with troubleshooting.
Features
Easy to set up in manual or automatic modes
Two-digit display for signal level indication
Isolated 0-20 ma or 4-20 ma current output
Uses 24V power supply or 26V supply w/ 24V battery backup (Model 700DC)
AC Model uses 85 to 265VAC 50 or 60 Hz (Model 700AC)
Environmentally sealed switches under graphic overlay
Low power consumption
Dust proof enclosure for long, maintenance-free operation
250VAC, 2A rated relay contacts
Small footprint: Occupies only three inches of space along the DIN rail
Standard 35mm DIN rail mounting
Fail-safe design
24 Volt battery backup
All wiring connections are made by plug-in connectors


Browse for more products in the same category as this item:

Instrumentation > Iris Products
Instrumentation > Iris Products > Flame Monitor Products
Instrumentation > Iris Products > Flame Monitor Products > Signal Processor Products
Analytical > Analyzer Products