Home > Instrumentation > Iris Products >

SIGNAL PROCESSOR FOR FLAME MONITOR SYSTEM, P/N: Model 800
SIGNAL PROCESSOR FOR FLAME MONITOR SYSTEM, P/N: Model 800
 


Description
 

The Model 800 Signal Processor, together with the Model S802 (IR) or S806 (UV) Viewing Head provides a truly compact, programmable, single channel flame monitoring system.

Settings can be changed from the factory defaults, by using the available software, or by using the terminal communications program on your computer.

Programming is accomplished by using a hand held or laptop computer using an RS232 cable which connects to the mini jack program port located on the front of the unit.

Multiple Signal Processors can be connected to the same RS232 bus using a readily available Y-cable adapter.
Technical Information
Built in universal power supply 85 to 265VAC, 50-60Hz
Standard DIN rail mounting
Settings are stored in EEPROM
Analog output
Flame On LED Indicator
Power, Fault and Flame Intensity LED Indicator
Factory default settings
Very small footprint: 1 1/2" wide x 3" High
6 terminals wide
2 sets of Flame On contacts
Self Check relay contacts
Adjustable set points via software and cable for single or multi drop
Self check: Once per second, both viewing head and signal processor
Compatible with S7xx and S8xx viewing heads


Browse for more products in the same category as this item:

Instrumentation > Iris Products
Instrumentation > Iris Products > Flame Monitor Products
Instrumentation > Iris Products > Flame Monitor Products > Signal Processor Products
Analytical > Analyzer Products
Instrumentation
Analytical
Instrumentation > Iris Products > Signal Processors