Address Translation Station;Mesh/Nodebus Connect, P/N: P0972VA

TRANSLATION STATION, MESH/NODEBUS CONNECT, P/N - P0972VA

The Address Translation Station (ATS) allows extension of I/A Series system Nodebus based systems with I/A Series system Mesh control network stations. The ATS allows Nodebus based control stations to seamlessly communicate with stations on The Mesh control network and vice-versa. The ATS transparently forwards communication from the Nodebus side without requiring any software changes to the Nodebus stations. Similarly network traffic from The Mesh control network side of the ATS is transparently  forwarded to Nodebus stations. The redundant version of the ATS modules consist of two single-width modules. These modules install in adjacent slots in a 1x8 or 2x8 mounting structure and connect to a redundancy connector. An ATS requires a workstation connected to The Mesh control network as a host. Interprocess Communications (IPC) between The Mesh control network and Nodebus stations to pass compound and block parameter data is supported. Boot hosting of Nodebus stations from Mesh workstations is not supported.

Any questions? Please feel free to give us a call at 281-421-1321 or email at [email protected].