Uplink Expansion Module - Superseded by P0973FQ, P/N: P0972YK

UPLINK EXPANSION MODULE w/ SIX PORT SLOTS, P/N - P0972YK

Any questions? Please feel free to give us a call at 281-421-1321 or email at [email protected].

Network Expansion Modules (P0972YK/P0973FQ)

The Network Expansion Modules (P0972YK/P0973FQ) are optional uplink cards that must be installed on an Invensys-supplied DFE module containing a Network Expansion Module slot.

---

NOTE
When installing the Network Expansion Module P0973FQ, the DFE module in which this NEM is being installed must be upgraded to firmware release 5.42.04 or higher before the installation. Upgrade kits for upgrading the firmware and its instructions can be obtained through kit AG101AE for “Gold” (see SI 0-00573) and kit AG101AF for “Platinum” (see SI 0-00574). The replacement procedure can be found in the section “Replacing or Adding a Network Expansion Module NEM (P0972YK/P0973FQ)” in The MESH Control Network Operation, and Switch Installation and Configuration Guide (B0700CA).

---